DO NOT DOUBLE CLICK ON THE SETUP.EXE FILE INCLUDED ON THIS ON THIS DISK. IF YOU USE THE SETUP.EXE FILE TO INSTALL THE DRIVER, YOU WILL RECEIVE CONNECTION ERRORS AND YOUR OUTPUT WILL BE LOST. YOU MUST FOLLOW THE STEPS BELOW TO INSTALL THIS PRODUCT.
This driver software will only work on Windows 95 or Windows 98, it will NOT work on Windows NT, DOS or MAC platforms!
Installing the printer software for the Konica GP-11:
(A) Both the English and Japanese versions are stored on floppy disk.
(B) Select [Add Printers] to install the driver.
(1) Insert the printer driver floppy into the floppy drive (A:).
(2) Double-click [My Computer] to open and click on [start],[settings],[printers].
(3) Double-click [Add Printer] to open. Click .
(5) Select [Local printer] and click .
(6) Click [Have disk].
(7) Select [Drive] A:\ and BROWSE.
For English use, click on the GPD 11E path.
For Japanese use, click on the GPD 11J path.
(8) Confirm the path name as either GPD11E (for English) or GPD11J (for Japanese) and then click on OK.
(9) Confirm [Konica Gold Caption (GoldCap.inf)] or [Konica Kinjiro (kinjiro.inf)] and then click .
(10) Select [LPT1] for port setting and click .
(11) Select [YES] to set the Gold Caption printer as the default.
(12) After the installation is complete, close [My Computer] all windows and return to the desktop.
IN SOME SITUATIONS, YOU MAY BE REQUESTED TO INSERT YOUR WINDOWS CD.
(C) Start up your application such as Microsoft Word (tm), Microsoft Power-
Point (tm) and the Gold Caption printer should appear as the default
printer.
Known limitations:
With some PCs the Gold Caption printer may return a connection error when a job is sent to it. To correct this problem, goto the desktop and LEFT click on "My Computer", then printers, then RIGHT CLICK on the Gold Caption Printer. Scroll down to the Properties line and then details. Goto the lower right side of the screen and click on "PORT SETTINGS". Verify that both check boxes are empty. In most cases, this setting will correct the error. In some cases the spooler may have to be sent to "Print directly to printer". This setting can be changed from the DETAILS screen by clicking on the Spool Settings box and clicking on the "Print directly to printer" check box.!
Logiciel pilote por Win98 & Win95 (201.83 KB) |
|||