This article is intended for oral disclosure only.
Please follow the procedure below.
While the message is displayed, press the center of the controller. The monitor display and data panel will turn off.
Turn the Main Switch dial to OFF position and remove the CompactFlash from the camera.
- When "No Card" message appears next time when the camera is activated in the recording mode, the camera and CompactFlash are OK.
- When "Card Error. OK" appears again, the CompactFlash may be faulty. Use other card.
Guide your customers not to turn the Main Switch dial to OFF position while "Card Error. OK" is displayed, or else the camera will keeps on displaying the same error message every time even if the other card is loaded. The controller must be pressed to reset the camera status.